A1402
MARS HUNTING FOUND EVIDENCE
SOURCE IMAGE SOL 1402
https://mars.jpl.nasa.gov/msl-raw-images/msss/01402/
mcam/1402MR0068690040702037E01_DXXX.jpg
This image was taken by Mastcam: Right (MAST_RIGHT) on board Mars rover Curiosity on Sol
(2016-07-16 15:00 14
UTC)
Mars Hunting Evidence down loaded the raw source image below 18
x 16in @ 72dpi, from JPL/NASA.gov
web site. The image was taken by the mast cam 7 feet atop Mars rover Curiosity.
Sol 1402's image without any enhancements is a field of rocks of several
geological categories, sand and
dirt like compositions.
2
This image was enhanced by dropping out the over
lay screening used to camouflage images by JPL/NASA
The enhanced image with arrows showing
interesting objects which are not geological in nature. Using a digital enhancing
program the light brown hue of the used to camouflage raw images can be
corrected and further application of
enhancements can clear up a poor image, however digital program are not capable
of creating a crystal clear images.
The browser's zoom tool can be use to view images up to 500
times. During the zoom viewing several objects not
geological were found. A possible biological entity with metal equipment being
carried can be seen. 7 other objects of
interest were found on the rock in lower left quadrant of the image; a mechanical
machine with geometry
components,
carved figures in the rock, a equipment array, and unknown square deep cut
foundation hole in the rock.
Zoomed images with enhancements are show below; a machine with squirrel
cage like design, a equipment array,
and a square cut hole with round key way like construction. The biological entity is in category
all its own.
COMPUTER GENERATED IMAGES TO HELP VISUALIZED THROUGH THE
FOGGY
IMAGE POSTED ON JPL/NASA'S WEB SITE
_________________________________
The biological entity is shown in a zoomed-in source image. Minor enchantments to highlight the
light and shadow aspect of the pixels, not geologic, however organic in
appearance with a mechanical
object in right hand . Imagine looks to be a being with right knee down, left foot planted in front,
may
have horse collar like protective garment around neck and shoulder. In its right hand a mechanical
large cylinder object with a smaller metallic extension cylinder tapered to a
round point..
The raw source images are fuzzy and muted and are not sharp and
clear, the agency
posting the images wants it that way. CAD Computer added drawing is use to help
visualized the object. This CAD image is the results of a digital technician using
a
geometric drawing program to re create the object from the source image. In no
way
is this CAD creation designed to deceive the viewer to think it is the actual
object.
The CAD image is clearly a mechanical devise with hamster cage like
component.
A guess would put this devise as a electric generator, however it is anything
other
than geologic.
The object is consistent with a commutations array unit
mounted on top of the rock. There are
other objects to small and fuzzy to make a 3D imagines.
The raw zoomed in image is casting a long shadow and is extremely
fuzzy and and not
easy to visualized in totality. However there are several components that are recognized
to be commutations components with data transmission as a their function. The
two
cones objects look to be back to back sound concentration components and top
right
is consistent with a feeder horn from a satellite dish. A CAD image of a dish
was
added to original image to show how all three of these objects jive with the
logic
of communications net work set up on the rock; a generator, a array post and the
square
cut foundation of a satellite dish.
Actual earth designed feeder horn is inserted in the image to help visualize the
resemblance
to the object in the Mars image.
THIS PAGE IS UNDER CONSTRUCTION
