TWIN
88 INCH CARBON FIBER WING
THIS PAGE UNDER CONSTRUCTION
88 INCH MEGA MANTA FOAM CORES WERE CUT
YEARS AGO AND WERE SKINNED
WITH CARBON FIBER
BY A CUSTOMER
THE CARBON FIBER WING WAS
ALMOST 11 LBS.
AFTER GETTING THE WING " MM 88" BACK
TRICK WAS TO TRIM WEIGHT
WING LOADING 15.85 @ IT WAS SET UP
MM 88 WITH ALL CARBON FIBER SURFACING
MASSIVE TIPS, CENTER COMPARTMENT, AND
AILERONS ARE CUT DOWN TO START THE RE DO
REMOVED THE EXTENDED NOSE 35OZ
THE PROP BAY WAS CUT FOR TWO MOTORS AND TWO 13/6 PROPS
CUTOUT FOR TWO PROPS ELIMINATED
19 MORE OZ
THE AILERONS WERE OVER 10 OZ
THE REPLACEMENT AILERONS, CARBON FIBER OVER BALSA
3.8 OZ
TWO MOTORS WITH RAW COWLS RECONSTRUCTED
FROM
SAILPLANE SLIP ON NOSE CONES
RAW SANDING AND REMOVAL OF MASSIVE SERVOS 8OZ EACH
COWLS WILL HOUSE THE SPEED CONTROLLERS
AND MOTOR WITH
HEAT SINKS
PAPER CLIP LIKE KEEPERS TO
ALLOW AIR FLOW AND TO KEEP PRESSURE
ON THE HEAT SINKS PRESSING ON THE CONTROLLERS
HEAT SINKS
MUCH SANDING THEN A THIN COAT
OF CLEAR RESIN
MORE TO COME AS PROGRESS IS MADE
________